Mount- steering stem-Mount)
(Fingerprint Bike Remote
Remote Bike engine start & Fingerprint Garage door entry.
secure & start your bike with your finger impression.
Memory capacity 3 to 8 fingerprints.
Working Description of
finger is placed on the fingerprint scanner mounted on the bike's dash
board to start the bike engine
The fingerprint scanner
compares the finger
impression with the ones that were stored in its memory when the system
was first installed on the bike.The bike owner has the
permission to add or delete fingerprints thus allowing &
disallowing people to ride the bike.
finger impression matches with
those stored in "Bikesafe-99" memory
then access or permission is granted and you can start the bike.
does not match, the bike does not start as it cuts of fuel supply ie no
unauthorized person can ride the bike.
Bikesafe-99 is available in two versions
3 fingerprint memory + Single
Mode (Dashboard Installation) Fingerprint Bike engine start. +Speed
Control. Warranty 5 years
Bikesafe-99 "Basic" : 499 $
8 fingerprint memory + Dual Mode (Bike Dashboard + Garage Door
Installation) Fingerprint Car engine start + Auto telephone dialer.+
Speed Control. Warranty 5 years
Bikesafe-99 "Intermediate" : 599 $
Print Open 333
Fingerprint Garage Door opener
8 Fingerprint Memory Garage Door opener
fingerprint memory + Complete Wireless Unit + Self Installation guide +
Warranty 5 years
Additional Features of
is installed on Bike's dash board -steering stem &
also externally-on garage door thus securing unauthorized
engine start and unauthorized garage door entry.
Installation Guide for easy installation
installation features makes it easy for customers to do the
installation on their own. The guided voice installation manual checks
your installation status and troubleshoots if the installation is not
done properly. It directly connects with the technical support no
001-650-690-7586 to report successful installation. In short the
installation is just a plug and play application. It takes 20 minutes
for the installation.
also gives additional web cam support and installation instructions
over the phone. In desired cases a qualified technician can do the
installation at your home or office with prior appointment. The
installation charges by a qualified technician anywhere in the USA or
UK is 50 $ or 50 pounds.
Control Function to Reduce Accidents
There are two
activating or deactivating speed limit function.
Limit feature activation for
authorized drivers enrolled through fingerprint verification system.
voice and text message from your cell phone.
applicable to all authorized riders of the bike.
helps the authorized driver of the bike to limit the speed or lock the
speed of the bike to a desired level.
The owner of
Bikesafe-99 system can
control the speed of other authorized rider of the bike. When the
fingerprint is enrolled the speed limit can be unlocked or locked.
fingerprint is scanned on the system or when the fingerprint is
enrolled in the system, a voice prompt asks for speed limit.
you wish to
by-pass this feature you simply say "Disable speed limit".
you wish to
activate speed limit you simply say "100 miles/ hour" or any desired
this information.When the authorized rider scans his fingerprint next
time the speed control feature activates and the limit is set.
limit feature can be also activated
by sending a text message through your cell phone to sim card built in
the Bikesafe-99 system.
speed limit is
locked and any authorized rider attempts to cross the speed limit then
the system activates auto dialer.
calls the numbers of the relatives or friends stored in the system to
inform about current speed status.
feature can be unlocked or locked by
the authorized rider or original owner of Bikesafe-99 system.
function helps to reduce on road
accidents caused due to high speed driving. This function is standard
in all versions of Bikesafe-99.
333 Fingerprint Garage
Intermediate Version receives Free
Fingerprint Garage door opener to secure your bike. Scan
you fingerprint on Print-Open-333 fingerprint scanner to open the
Print-Open-333 is completely wireless and takes only 20 minutes to
install on any Garage. Technical support for installation is available
on phone and in person.
a memory of 8 fingerprints thus allowing 8 authorized people to gain
access to the Garage.
want your bike
completely safe not only when it is parked on road but also when it is
in your garage.
road bike engine
starts only with fingerprint. However for extra security we have also
included Print-Open-333 Fingerprint Garage door opener for free. We
want you to have fun with our products.
Dialer Alert system
is activated if
an unauthorized person
attempt's to start the bike or gets access to the garage . If an
unauthorized person places his finger on the fingerprint scanner on the
bike then the inbuilt dialer system calls up on your mobile
phone number .It then alerts you that the bike was attempted to be
a deactivation code to deactivate the system if necessary or to ride
the bike incase your finger is swollen or hurt.